CellarPro 2000VSi 220V / 50Hz Cooling Unit #27248.
CellarPro 2000VS 220V / 50Hz cooling units (1/4 Ton Nominal) are designed for low profile installations in commercial and residential wine cellars up to 11.3 cubic meters. This cooling unit is designed for 220V / 50Hz environments only. It should not be used in 60Hz environments (eg North America).
CellarPro 2000VSi 220V / 50Hz Cooling Unit (P/N 27248). CellarPro engineered the low profile 2000VSi cooling unit specifically for installations in wine cellars with limited space.
Just 14 1/8-inches (358mm) wide and 13 1/4-inches (338mm) tall, the 2000VSi cooling unit will fit in between studs and/or above door frames. Dual independent variable-speed fans offer flexibility to trade-off between super-quiet operation vs maximum performance.
All air-cooled refrigeration equipment requires fresh air intake to dissipate the heat generated by the cooling unit. The fresh air intake CANNOT come from the wine cellar space – it must come from space outside the cellar.
Intuitive LED display panel mounted on the evaporator with digital programmable thermostat is simple and easy to use. Remote thermostat is available as an upgrade
Adjustable humidity control combines a high-output compressor with flexible fan cycles to maintain a recommended level of moisture inside your cellar.
Commercial-grade Electrofin coating protects the evaporator and condenser coils from leaks and corrosion.
Low profile for maximum flexibility
Shallow height fits above doors: 338mm H
Shallow width fits in between studs: 358mm W
Variable-speed fan inside the cellar
1745 BTUH on high fan speed
1581 BTUH on low fan speed
Variable-speed fan outside the cellar
43C maximum intake temperature / 61.5 dBA on the high fan speed
38C maximum intake temperature / 55.5 dBA on the low fan speed
Condensate management system
Oversized stainless-steel drain pan
100W heating element
12.7mm ID drain line for excess condensate
Energy-saver mode, quick-chill mode, and auto-defrost cycle provide convenient solutions to common cellar needs.
Temperature set point range is 8.3C to 16.7C when the cooling unit is properly sized.
Unit operates with minimal vibrations and less noise than comparable units from competitors.
Audible and visual alarms and maintenance-needed indicator protect the cooling unit and the wine cellar.
With dual power sources and a 3-meter power cord, the unit can be plugged into a receptacle from either the front or the rear of the cooling unit, providing flexibility for most installations.
Common dedicated 15-amp circuit is required to power the unit.
Our easy-access air filter protects the condenser coils and increases the expected useful life of the cooling unit.
Adjustable mounting brackets, included as standard equipment, ensure easy installation.
Removable steel case and refrigerant access valve provides access to the internal components for servicing and repair.
CellarPro’s 1-Year Standard Warranty, the most thorough in the industry, protects the unit against manufacturing defects
Size:358w x 566d x 338h (mm)
Power/Rating:220V AC / 50 Hz
– Startup (LRA): 13.5 Amps
– Unit Amp Rating: 2.39 Amps
– Total Watts with Fans on High: 320
– Total Watts with Fans on Low: 304
– Compatible with Dedicated 15-Amp CircuitBTUH @ 12.8C:
– Low Fan Speed: 1581 BTUH
– High Fan Speed: 1745 BTUH
1/4 Ton Nominal
CellarPro's 4200VSi-220V 1/3 Ton Nominal cooling units are suitable for wine cellars up to 42 cubic meters in both commercial and residential wine cellars. The 42 cubic meter cellar size assumes that the cellar is constructed with insulation of R19 or better in all walls and ceiling (ie no glass or uninsulated concrete), the cooling unit is not ducted, a setpoint of 15C inside the cellar and ambient temperatures up to 29C outside the cellar.
CellarPro's 3200VSi cooling units (1/3 Ton Nominal) are suitable for wine cellars up to 800 cubic feet in both commercial and residentialwine cellars. The 800 cubic feet cellar size assumes that the cellar is constructed with insulation of R19 or better in all walls and ceiling (ie no glass or uninsulated concrete), the cooling unit is not ducted, a setpoint of 55F inside the cellar and ambient temperatures up to 85F outside the cellar.
CellarPro's 4200VSi cooling units (1/2 Ton Nominal) are suitable for wine cellars up to 1,000 cubic feet in both commercial and residentialwine cellars. The 1,000 cubic feet cellar size assumes that the cellar is constructed with insulation of R19 or better in all walls and ceiling (ie no glass or uninsulated concrete), the cooling unit is not ducted, a setpoint of 55°F inside the cellar and ambient temperatures up to 85°F outside the cellar.
is ideal for smaller commercial and residential wine cellars and wine cabinets. TTW018 units are best suited for rooms up to 1500 cubic feet with limited glass and very good insulation. The TTW018 is easy to install and can be installed on your own without the support of a contractor. The max capacity of the TTW018 unit is 2,100 BTU/h (0.61 Kilowatts).
Quieter - Smaller - SmarterKOOLR MAGNUM
-Capacity max.: 900 cubic feet
-Through the wall type cooling system
-Don't be fooled by the low cost. This is the best system at any price!
Our wine cooling solution for keeping your wine at proper temperatures at the lowest cost possible so you can save the money for more wine to add to your wine cellar. With simple installation and use you can become professional wine collector. The wine cellar cooling units conveniently monitor the temperature inside your wine cellar, with digital display showing in adjacent room.
is ideal for small home wine cellars. TTW009 units are best suited for rooms up to 850 cubic feet with limited glass and very good insulation. This unit is also easy to install, and can be installed on your own without the support of a contractor. The max capacity of the TTW009 is 1,100 BTU/h (0.32 Kilowatts).